Home Company profile Products Downloads Contact Us E - mail
 
   
 


Building Products - Door Frame
 
Description  l  Salient Features  l  Standard Sizes  l  Colors  l  Premia Range  l 
Fabrication Guideline
 

ACCUCEL introduces the most convenient and elegant way to install door chaukhat frame, 'ACCUCEL' door frames are available in CKD condition to enable you to erect, install whenever & wherever you need. Ready to use, pre finished. ACCUCEL door frames are available in different colour and finishes and can be made in different sizes and styles as per requirement.

ACCUCEL Door chaukhat frame are fabricated from ACCUCEL rigid PVC foam profile FP11034 with integral skin made using breakthrough technology from Italy, to suit Indian conditions. Specially designed G.I. stiffeners are provided for strengthening door frame. ACCUCEL can be hot formed to provide arch door frames for special applications. ACCUCEL designer doors are made by using imported fiber skins with elegant design and contemporary styles. These are useful for hotel rooms, offices as well as inside doors in houses. Due to impeccable textured grain finish in the molding itself, subsequent light wood colors or lacquering or PU coating clear/stained allows the natural beauty of timber on these doors.

ACCUCEL is as elegant as any premium wood in appearance, It is equally workable, can be nailed, screwed, drilled, glued, sawn, tapped or welded just like wood. ACCUCEL comes in a range of different shapes, colors & finishes. ACCUCEL is characterized by excellent screw holding strength (>200 Kgf) and shore hardness A of more than 70.

Accucel Premia range of profiles with printed elegant finishes can also be offered.

  • ACCUCEL DCF 01 - Accucel profile frame of FP 10030
  • ACCUCEL DCF 01 A - Accucel profile frame of FP 10015
  • ACCUCEL DCF 02 - Accucel profile frame of FP 11034
  • ACCUCEL DCF 03 - Accucel profile frame of FP 6030
  • ACCUCEL DCF 04 - Accucel profile frame of FP 5035


Top

Salient Features
 
  • Ready to use, pre finished.
  • Functional
  • Elegant
  • Long lasting
  • Easy to install
  • Unique design
  • Light weight
  • Easy to clean
  • Maintenance free
  • Water proof, termite proof
  • Fire retardant
  • Scratch resistant surface
  • Easy to fix normal hardware / fittings like hinges, mortise lock, door closer etc.
  • Being sandwiched paneled, heat and sound insulate.
  • No need for seasonal treatments as required for hard wood.
  • Can be repainted with PU coatings or DUCO paint at site after few years of use if desired.
Top

Standard Sizes
 
  • 900 x 2100, 800 x 2100, 750 x 2100
  • 900 x 2000, 800 x 2000, 750 x 2000
Top

Colors
 
White, Silver Gray, Ivory, Golden Yellow, Red, Green, Blue, walnut, white cedar, Mahogany.

Top

Premia Range
 
Rose wood Mahogany Boverian beech Teak
Top

Fabrication Guideline - ACCUCEL DCF - 01 (FP - 10030)
 
  • Join two length of FP 10015 using Fevikwik and solvent adhesive. Additional bonding strength is provided by using silicone sealant or Fevicol SP5 epoxy sealant.
  • Cut joined section as per required length for vertical stile 2 pcs. & horizontal stile 1 pc.
  • Fix Gl ' J ' stiffener 25 x 19 x 8 in the hollow spaces as shown.
  • Fix' L ' shaped corner pcs. (2 nos.) With zinc coating (90 x 75x75)
  • Accucel door chaukhat frame should be fixed after plaster work & flooring is completed.
  • Fix the frame to the wall using expandable type fischer screws with sleeve or roll plugs & sheet metal screws csk 75x10 size.
  • Press fit the Tee profile FP 2519 in the groove.
  • Low tack adhesive protective film should be fixed on surface of frame to protect surface from scratches.
  • Use the supporting bar at bottom side of frame for maintaining frame in perfect plumb line.
  • Fill up the gap between frame & wall with fevicol mixed white cement.
  • Fix corner molding FP 1515 to the frame casing solvent adhesive / fevikwik to provide elegance & close gap if any.

Fabrication Guideline - ACCUCEL DCF - 02 (FP - 11034)
 
  • Cut horizontal stile on both ends as per required length using standard fixture to match contour of profile FP 11034 while joining vertical stile (2 pcs.)
  • Fix the vertical & horizontal stiles using 25 x 4 csk screws.
  • Fix the special Gl stiffener on back side of vertical & horizontal stile using 13x4 csk screws.
  • Fix ' L ' shaped corner pcs. (2 nos.) with zinc coating (90 x 75x75)
  • Accucel door chaukhat frame should be fixed after plaster work & flooring is completed.
  • Fix the frame to the wall using expandable type fischer screws with sleeve or roll plugs & sheet metal screws csk 75x10 size.
  • Screws cap of different colour can be applied on fixing screws.
  • Low tack adhesive protective film should be fixed on surface from scratches.
  • Use the supporting bar at bottom side of frame for maintaining frame in perfect plumb line.
  • Fill up the gap between frame & wall with fevicol mixed white cement.
  • Fix corner molding FP 1515 to the frame casing solvent adhesive / fevi kwik to provide elegance & close gap if any.

  Top Next 
 
     
Home  |  Company Profile  |  Products  |  Downloads  |  Contact Us  |  E - mail
Copyright © 2007, ACCURA POLYTECH PRIVATE LIMITED. All rights reserved.